Technical summary
How should Endpoint Policies: override action + categories + thresholds per path (UI uses PRO Mode) be configured in Aegisify WAF, and what is the current default? is part of the WAF request-inspection, enforcement, visibility, or exception-management surface. This article is grounded in the supplied Aegisify WAF 1.20.13 plugin package. It documents current behavior and defaults rather than relying on older FAQ wording.
Where administrators configure or verify it
Primary wp-admin path: wp-admin → Aegisify WAF → API Shield. Exact controls can be distributed across the related tab/page when the feature is composed of multiple engines.
Current 1.20.13 defaults and related controls
The table below lists settings in the supplied current source that are directly related to this topic. The current default/bound/status shown is code-derived. Where the product does not define a named Medium preset, the shipped default is documented as the baseline operating point rather than inventing a value.
| Setting | Current default / bound / status | Why this default | How to tune safely |
|---|---|---|---|
bot.per_path_limits |
[] | Blank or empty by default because this value depends on the site, organization, route, identity source, recipient, API credential, or exception policy. Configure it only with verified site-specific data. | Supply only validated site-specific values. Leaving it blank/empty means no custom value, exception, recipient, credential, route, or policy has been asserted by default. |
managed_rules.categories.path_traversal |
ON / true | Enabled in the shipped baseline as the product’s current safe operating choice for this control. | ON activates the behavior; OFF removes that specific behavior. Use OFF only when the control is intentionally unnecessary, another trusted layer owns the function, or a compatibility investigation proves the control is involved. Re-enable after testing when protection is still required. |
managed_rules.thresholds.path_traversal |
1 | Enabled in the shipped baseline as the product’s current safe operating choice for this control. | ON activates the behavior; OFF removes that specific behavior. Use OFF only when the control is intentionally unnecessary, another trusted layer owns the function, or a compatibility investigation proves the control is involved. Re-enable after testing when protection is still required. |
api.default_action |
inspect | “inspect” is the exact shipped value in the current version. It is preserved as the baseline because the plugin code defines it as the default rather than deriving it from the old FAQ text. | Keep the shipped value unless a documented site requirement calls for a different mode or identifier. Validate the change in the feature’s logs/status view and roll back if behavior becomes less reliable. |
wp_protect.thresholds_rest.block_at |
0 | Disabled in the shipped baseline because enabling it can change live request handling, indexing behavior, automation, enforcement, or integration traffic and should be reviewed for the specific site first. | OFF leaves the behavior inactive. Turn it ON only after checking prerequisites and expected traffic/content because this setting can introduce enforcement, automation, indexing, outbound integration, or additional processing depending on the feature. |
wp_protect.thresholds_rest.challenge_at |
0 | Disabled in the shipped baseline because enabling it can change live request handling, indexing behavior, automation, enforcement, or integration traffic and should be reviewed for the specific site first. | OFF leaves the behavior inactive. Turn it ON only after checking prerequisites and expected traffic/content because this setting can introduce enforcement, automation, indexing, outbound integration, or additional processing depending on the feature. |
wp_protect.thresholds_rest.rate_limit_at |
0 | Disabled in the shipped baseline because enabling it can change live request handling, indexing behavior, automation, enforcement, or integration traffic and should be reviewed for the specific site first. | OFF leaves the behavior inactive. Turn it ON only after checking prerequisites and expected traffic/content because this setting can introduce enforcement, automation, indexing, outbound integration, or additional processing depending on the feature. |
ai_security.agency.action |
monitor | “monitor” is the shipped baseline so administrators can collect evidence and verify normal traffic or behavior before moving to stronger enforcement where applicable. | Where this control exposes Off / Monitor / Block: Off disables its decision path; Monitor records/evaluates without blocking; Block enforces the decision. Start with Monitor for uncertain traffic, then move to Block after reviewing false positives and exceptions. |
Adjustment strategy
Change one control at a time, save it through the product UI, reproduce the legitimate and malicious/test flow, and review the product log/status surface. For enforcement controls, use Monitor/Observe first when normal behavior is uncertain; move to Block only after the signal is reliable. For thresholds, do not jump directly from the default to an extreme unless an active incident requires emergency containment and a recovery path exists.
Operational guidance
Use the feature’s logs and current request evidence as the tuning source. Compare normal traffic with the event that triggered the control, then change only the smallest setting required.
Technical keywords
Aegisify WAF, 1.20.13, action, categories, endpoint, mode, override, path, per, policies, thresholds, uses, bot, per_path_limits, managed_rules, path_traversal
Source baseline
Verified package: Aegisify WAF 1.20.13. Primary source files: includes/class-aegiswaf-storage.php; includes/class-aegiswaf-ai-security.php; includes/class-aegiswaf-api-security.php; includes/class-aegiswaf-managed-rules.php; includes/ddos/class-aegiswaf-ddos-storage.php; includes/admin/pages/class-aegiswaf-page-waf-rules.php; includes/admin/pages/class-aegiswaf-page-logs.php; includes/admin/pages/class-aegiswaf-page-access.php. If a future plugin version changes these settings, support should re-read the installed version rather than carry these defaults forward automatically.